Steering Heater Test
In this manual: Steering Heater Test
3steps
~18min
2/5difficulty
Done 0 of 3
Test
NOTE: SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
1. Driver's Airbag - Remove
2. Steering Heater - Test

- Disconnect the connector (A).
- Check for continuity between the terminals according to the table. There should be continuity.
NOTE: When the steering heater temperature is 73 ºF (23 ºC), resistance value is 2.0+-0.20 Ω.
- If the continuity is not as specified, the steering heater (B) is faulty; replace the steering wheel assembly.
3. All Remove Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?