Fuel Fill Door Opener Switch Removal and Installation
In this manual: Fuel Fill Door Opener Switch Removal and Installation
6steps
~36min
2/5difficulty
Done 0 of 6
Removal/Installation
1. Driver's Door Panel - Remove
2. Fuel Fill Door Opener Switch - Remove

- Disconnect the connector (A).
- Remove the fuel fill door opener switch (B).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Fuel Fill Pipe Removal and Installation
Removal/Installation
1. Fuel Pressure - Relieve
2. Fuel Tank - Drain
3. Mis-Fuel Inhibit Device - Remove
4. Rear Inner Fender (Left Side) - Remove
5. Fuel Fill Pipe - Remove
USA and Canada models

Mexico models

- USA and Canada models: Disconnect the quick-connect fitting (A).
- Mexico models: Disconnect the hoses (B). When you disconnect the hose, slide back the clamp, then twist the hose as you pull to avoid damaging it.
- Remove the bolts (C).
- Remove the fuel fill pipe (D).
6. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?