Glove Box Light Removal and Installation
Removal/Installation
1. Glove Box - Remove
2. Glove Box Light - Remove
Glove Box Light: 1.4W

- Remove the bulb (A).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Glove Box Removal and Installation
Removal/Installation
1. Dashboard Side Lid - Remove (Passenger's Side)
2. Passenger's Dashboard Undercover - Remove
3. Passenger's Dashboard Trim Panel - Remove
4. Glove Box - Remove

- Open the glove box (A).
- Release both glove box stops (B) by pushing them in, and then pull down the glove box.

- Remove the bolts (A) and screws (B).

- Remove the glove box (A), and then remove the glove box light (B).
5. Glove Box Damper - Remove (For Some Models)

- If necessary, remove the glove box damper (A).
6. Glove Box Lock Spacer - Remove

- If necessary, remove the grove box lock spacer (A).

7. All Removed Parts - Install
- Install the parts in the reverse order of removal.
NOTE: If the bolt threads of the steering hanger beam are stripped, replace the bolts with one-size larger bolts (available as a service part), which are specifically designed to tighten the instrument panel to the specified torque setting.
GPS Antenna Removal and Installation
Removal/Installation
1. Audio Unit Assembly (Without Navigation) - Remove
2. Audio-Navigation Unit Assembly (With Navigation) - Remove
3. GPS Antenna - Remove

4. All Removed Parts - Install
- Install the parts in the reverse order of removal.