Seat Heater Test - Ventilated Seats
In this manual: Seat Heater Test - Ventilated Seats
14steps
~84min
3/5difficulty
Done 0 of 14
Test
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
Driver's Seat
1. Driver's Seat - Remove
2. Driver's Seat Heater - Test
Seat cushion heater

- Disconnect the connector A.
- Check for continuity between the terminals according to the table.

- If the continuity is not as specified, replace the driver's seat cushion heater.
Seat-back heater

- Remove the driver's seat-back cover as needed.
- Disconnect the connector B.
- Check for continuity between the terminals according to the table.

- If the continuity is not as specified, replace the driver's seat-back heater.
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Front Passenger's Seat
1. Front Seat - Remove
2. Front Passenger's Seat Heater - Test
Seat cushion heater
- Disconnect the connector A.
- Check for continuity between the terminals according to the table.


- If the continuity is not as specified, replace the front passenger's seat cushion heater.
Seat-back heater

- Remove the front passenger's seat-back cover as needed.
- Disconnect the connector B.
- Check for continuity between the terminals according to the table.

- If the continuity is not as specified, replace the front passenger's seat-back heater.
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?