VSA Off Switch Removal, Installation, and Test
In this manual: VSA Off Switch Removal, Installation, and Test
2steps
~12min
1/5difficulty
Done 0 of 2
Removal/Installation
1. Driver's Dashboard Lower Cover - Remove
2. VSA Off Switch - Remove

3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Test
1. VSA Off Switch - Test
VSA OFF switch 5P Type

VSA OFF switch 8P Type

- On the switch side, check for continuity between the connector terminal in each switch position according to the table.
- If there is no continuity, replace the VSA OFF switch.
Was this page helpful?