Front Stabilizer Link Removal and Installation
In this manual: Front Stabilizer Link Removal and Installation
4steps
~24min
2/5difficulty
Done 0 of 4
Removal
1. Vehicle - Lift
2. Front Wheel - Remove
3. Stabilizer Link - Remove

- Remove the flange nuts (A) while holding the respective joint pin (B) with a hex wrench (C).
- Remove the stabilizer link (D).
Installation
1. Stabilizer Link - Install
- Install the stabilizer link (A).
NOTE: The stabilizer link has a paint marks (B). The left stabilizer link is marked with yellow paint, and the right stabilizer link is marked with blue paint.

- Install the new flange nuts (C), and tighten them to the specified torque while holding the respective joint pin (D) with a hex wrench (E).
2. Front Wheel - Install
Was this page helpful?