Front Corner Sensor Removal and Installation
In this manual: Front Corner Sensor Removal and Installation
4steps
~24min
2/5difficulty
Done 0 of 4
Removal/Installation
1. Front Corner Sensor - Remove

- Remove the front bumper side trim (A).
- Disconnect the connector.

- Remove the front corner sensor (A).
NOTE: Do not spread the portion (B) of the front bumper lower mesh too much as it may damage the front bumper side trim.
- Remove the ring (C).
2. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?