Front Seat Frame Removal and Installation
In this manual: Front Seat Frame Removal and Installation
3steps
~18min
2/5difficulty
Done 0 of 3
Removal/Installation
NOTE: SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
1. Front Seat - Remove
2. Front Seat-Back Cover - Remove
3. Front Seat Cushion Cover - Remove
4. Front Seat Belt Buckle - Remove
5. Front Seat Belt Outer Lap Pretensioner (Passenger's Side) - Remove
6. Upper Rail Outer Cover - Remove (Driver's seat)
Power seat

Manual seat

7. Upper Rail Inner Cover - Remove (Driver's seat)
Power seat

Manual seat

8. Front Seat Frame - Remove

- Remove the front seat front foot covers (A).

- Remove the front seat rear foot covers (A).

- Remove the recline inner cover (A) and the center inner cover (B).
9. All Removed Parts - Install
- Install the parts in the reverse order of removal.
NOTE: Clear the driving position memory after doing any of the following actions.
- Replace the new front seat frame.
- Substitute a known-good front seat frame.
Was this page helpful?