Radiator Removal and Installation
In this manual: Radiator Removal and Installation
2steps
~12min
1/5difficulty
Done 0 of 2
Removal/Installation
1. Engine Coolant - Drain
2. A/C Condenser Fan Shroud Assembly and Radiator Fan Shroud Assembly - Remove
3. Upper Radiator Hose and Lower Radiator Hose - Disconnect

- Disconnect the upper radiator hose (A) and the lower radiator hose (B).
4. A/C Condenser Mounting Bolt - Remove
5. Radiator - Remove

- Pull up the radiator.
- Remove the lower cushions (A).
6. ECT Sensor 2 - Remove
- Remove the ECT sensor 2 as needed.
7. All Removed Parts - Install
- Install the parts in the reverse order of removal.
NOTE:
- When the radiator assembly installed. Make sure the lower cushions are set securely.
- After installing all the removed parts, refill the radiator with engine coolant, and bleed the air from the cooling system.
Was this page helpful?