Mirror Holder Removal and Installation
In this manual: Mirror Holder Removal and Installation
4steps
~24min
2/5difficulty
Done 0 of 4
Removal/Installation
1. Mirror Holder - Remove

- Carefully push on the top edge of the mirror holder (A) by hand.
- Put a shop towel (B) in the opening between the bottom edge of the mirror holder and the mirror housing (C) to prevent scratches.
- Insert a flat-tip screwdriver (D) under the mirror holder, and twist the screwdriver to release the hooks (E).
NOTE: To separate the two parts, do not pry up on the mirror holder but the hooks as this can cause either the mirror glass or actuator to break.

- Remove the mirror holder (A), and then disconnect the connectors (B).
2. All Removed Parts - Install
- Install the parts in the reverse order of removal, check the actuator operation.
Was this page helpful?