Side Sill Panel Removal and Installation
In this manual: Side Sill Panel Removal and Installation
6steps
~36min
2/5difficulty
Done 0 of 6
Removal
1. Front Wheel Arch Protector - Remove
- Remove the front wheel arch protector as needed.
2. Front Inner Fender - Remove
- Remove the front inner fender as needed.
3. Rear Wheel Arch Protector - Remove
- Remove the rear wheel arch protector as needed.
4. Rear Inner Fender - Remove
- Remove the rear inner fender as needed.
5. Side Sill Panel - Remove
- Remove the screws and the clips.
NOTE: The clip (A) will stay in the side sill panel.

- Slide the side sill panel (A) forward, and remove it.
NOTE: The side clips will stay in the body.

- Remove the side clips from the body by pushing them.
Installation
1. Side Sill Panel - Install
- Install the side clips on the side sill panel (A).

- Hold the panel up, and fit all the side clips into the holes in the body. Push on the panel until the clips snap into place.
- Install the screws and the clips.

2. Rear Inner Fender - Install
3. Rear Wheel Arch Protector - Install
4. Front Inner Fender - Install
5. Front Wheel Arch Protector - Install
Side Turn Signal Light Removal and Installation
Removal/Installation
1. Mirror Housing Cover - Remove
2. Side Turn Signal Light - Remove
Side Turn Signal Light: LED

3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?