A/T Differential Carrier Bearing Replacement
In this manual: A/T Differential Carrier Bearing Replacement
~1min read
Replacement
NOTE:
- The carrier bearing and the carrier bearing outer race should be replaced as a set.
- Inspect and adjust the carrier bearing preload whenever the bearing is replaced.
- Check the bearing for wear and rough rotation. If the bearing is OK, removal is not necessary.
- Unless otherwise indicated, illustrations used in the procedure are for AWD.
1. Carrier Bearing - Remove

- Remove the carrier bearing (A) using a commercially available bearing puller (B), a bearing separator (C), and a spacer (D).
2. Carrier Bearing - Install

- Install the carrier bearing (A) until it bottoms using the 45 x 55 mm installer attachment and a press.
Special Tool Required

- Installer Attachment, 45 x 55 mm 07MAD-PR90100
Was this page helpful?