Rear Lower Arm B Removal and Installation
In this manual: Rear Lower Arm B Removal and Installation
6steps
~36min
2/5difficulty
Done 0 of 6
Removal/Installation
1. Vehicle - Lift
2. Rear Wheel - Remove
3. Lower Arm B - Remove

- Position a floor jack under the lower arm B.
- Raise the floor jack until the suspension begins to compress.
- Remove the flange bolt (A) from the bottom of the damper.
NOTE: Use the new flange bolt during reassembly.
- Remove the flange bolt (C) from the knuckle.
NOTE: Use the new flange bolt during reassembly.
- Lower the floor jack gradually.

- Remove the flange bolt (A) from the rear subframe.
NOTE: Use the new flange bolt during reassembly.
4. All Removed Parts - Install
- Install the lower arm B in the reverse order of removal, and note these items:
- Loosely install nuts and/or bolts to secure the bushings.
Load the suspension with the vehicle's weight and tighten the nuts and/or bolts to the specified torque.
- Before installing the wheel, clean the mating surfaces on the brake disc/drum and the inside of the wheel.
5. Wheel Alignment - Check
Was this page helpful?