Wiper Arm Removal and Installation
In this manual: Wiper Arm Removal and Installation
~1min read
Removal/Installation
NOTE:
- Before removal and installation, turn the wiper/washer switch ON to (LO) or (HI) position, then OFF to return the motor shaft to the park position.
- Do not use the wiper/washer switch (AUTO) or (INT) position in this step.
Windshield
1. Windshield Wiper Arm Assembly - Remove

2. All Removed Parts - Install
- Install the parts in the reverse order of removal.
3. Windshield Wiper Arm/Nozzle - Adjust
Rear Window
1. Rear Window Wiper Arm Assembly - Remove

- Open the cap (A), then remove the rear window wiper arm assembly (B).
2. All Removed Parts - Install
- Install the parts in the reverse order of removal.
3. Rear Window Wiper Arm/Nozzle - Adjust
Was this page helpful?