Front Suspension Stroke Sensor Removal and Installation
In this manual: Front Suspension Stroke Sensor Removal and Installation
6steps
~36min
2/5difficulty
Done 0 of 6
Removal/Installation
1. Vehicle - Lift
2. Front Suspension Stroke Sensor - Remove

- Disconnect the connector.
- Remove the front suspension stroke sensor (A).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
4. Headlight Initial Position - Learn
NOTE: If the original front suspension stroke sensor is installed, confirm that all systems work properly.
Front Turn Signal Light Removal and Installation
Removal/Installation
1. Front Bumper - Remove
2. Front Turn Signal/Parking Light - Remove

- Remove the front bumper side trim (A).
- Disconnect the connector.
Front Turn Signal Light: 24 W
Front Parking/Turn Signal Light: 28W/8W

- Disconnect the connector.
- Remove the turn signal light (A).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?