Front Door Outer Molding Removal and Installation
In this manual: Front Door Outer Molding Removal and Installation
3steps
~18min
2/5difficulty
Done 0 of 3
Removal/Installation
1. Front Door Outer Molding - Remove

- Pull away the front door weatherstrip (A) and remove the clip.
- Remove the screw and the hook (B).

- Pull out the upper edge of the front door outer molding (A) from the edge of the sash, and cut the double-sided adhesive tape (B) with a utility knife, and then remove the molding from the sash.
NOTE: Replace it with a new front door outer molding.
2. All Removed Parts - Install
- Install the parts in the reverse order of removal.
NOTE :
- Carefully remove the remaining double-sided adhesive tape from the sash, and then clean the sash surface with a shop towel dampened with isopropyl alcohol.
- Install the new front door outer molding.
Was this page helpful?