Heated Windshield Wiper Area Switch Test
In this manual: Heated Windshield Wiper Area Switch Test
~1min read
Test
1. Driver's Dashboard Lower Cover - Remove
2. Heated Windshield Wiper Area Switch - Test
NOTE: The mounting position of the heated windshield wiper area switch (A) is different depending on the model.
- Check the heated windshield wiper area switch according to the table.
NOTE:
- When an LED is located between terminals, check if the LED illuminates by connecting power and ground to the LED.
- Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).


[]: 10P type
*: 10P type
- If the result is not as specified, replace the heated windshield wiper area switch.
3. All Parts Removed - Install
- Install the parts in the reverse order of removal.
Was this page helpful?