ECT Sensor 1 Removal and Installation
In this manual: ECT Sensor 1 Removal and Installation
4steps
~24min
2/5difficulty
Done 0 of 4
Removal/Installation
1. Engine Cover - Remove
2. Engine Coolant - Drain
3. ECT Sensor 1 - Remove

- Disconnect the connector (A).
- Remove the ECT sensor 1 (B).
4. All Removed Parts - Install
- Install the parts in the reverse order of removal with a new O-ring.
ECT Sensor 2 Removal and Installation
Removal/Installation
1. Splash Shield - Remove
2. Engine Coolant - Drain
3. ECT Sensor 2 - Remove

- Disconnect the connector (A).
- Remove the ECT sensor 2 (B).
4. All Removed Parts - Install
- Install the parts in the reverse order of removal with a new O-ring.
Was this page helpful?