ANC/Active Sound Control Unit Removal and Installation
In this manual: ANC/Active Sound Control Unit Removal and Installation
2steps
~12min
1/5difficulty
Done 0 of 2
Removal/Installation
1. Glove Box - Remove
2. ANC/Active Sound Control Unit - Remove
v
- Using a TORX E8 bit, loosen the TORX bolt (A), then pull out the ANC/active sound control unit (B).
- Disconnect the connector, then remove the ANC/active sound control unit.
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
NOTE: If the bolt threads of the steering hanger beam are stripped, replace the bolts with one-size larger bolts (available as a service part), which are specifically designed to tighten the instrument panel to the specified torque setting.
Was this page helpful?