Cargo Area Accessory Power Socket Removal and Installation
In this manual: Cargo Area Accessory Power Socket Removal and Installation
3steps
~18min
2/5difficulty
Done 0 of 3
Removal/Installation
1. Cargo Area Accessory Power Socket - Remove

- Gently press the tabs (A), and remove the cargo area accessory power socket (B).
- Disconnect the connector (C).

- Gently press the tabs (A), and remove the housing (B) from the left rear side trim panel. Note the location of the indexing tab (C).
2. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?