EGR Pipe Removal and Installation
In this manual: EGR Pipe Removal and Installation
4steps
~24min
2/5difficulty
Done 0 of 4
Removal/Installation
EGR Pipe A
1. Engine Cover - Remove
2. Front Bulkhead Cover - Remove
3. Splash Shield - Remove
4. EGR Pipe A - Remove

- Remove the EGR pipe A and gaskets (B).
5. All Removed Parts - Install
- Install the parts in the reverse order of removal with new gaskets.
Removal/Installation
EGR Pipe B
1. Engine Cover - Remove
2. EGR Pipe B - Remove

- Remove the EGR pipe B and gaskets (A).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal with new gaskets.

EGR Valve Removal and Installation
Removal and Installation
1. Engine Cover - Remove
2. EGR Valve - Remove

- Disconnect the connector (A).
- Remove the EGR valve (B).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal with a new gasket.
Electrical Compass Unit Removal and Installation
Removal/Installation
1. Headliner - Remove
2. Electrical Compass Unit - Remove

- Disconnect the connector (A).
- Remove the electrical compass unit (B).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
NOTE: If you replaced the electrical compass unit, set the compass zone.
Was this page helpful?