Power Mirror Switch Removal and Installation
In this manual: Power Mirror Switch Removal and Installation
2steps
~12min
1/5difficulty
Done 0 of 2
Removal/Installation
1. Driver's Dashboard Lower Cover - Remove
2. Power Mirror Switch - Remove

3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Power Seat Control Unit Removal and Installation
Removal/Installation
NOTE: If the replaced control unit is not a new one, clear the driving position memory. If the original control unit is installed, confirm that all systems work properly.
1. Driver's Seat Recline Cover - Remove
NOTE: If you are removing the driver's seat recline cover, you do not need to remove the driver's seat.
2. Power Seat Control Unit/Power Seat Adjustment Switch - Remove

- Remove the power seat control unit/power seat adjustment switch knobs (A).
- Remove the power seat control unit/power seat adjustment switch (B).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
4. Driving Position Memory - Clear
- If the replaced power seat control unit is not a new one, clear the driving position memory.
Was this page helpful?