Parking Brake Switch Test
In this manual: Parking Brake Switch Test
2steps
~12min
1/5difficulty
Done 0 of 2
NOTE: If both the ABS/VSA indicator and the brake system indicator come on at the same time, check the VSA system for DTCs first.
1. Parking Brake Switch - Test

- Disconnect the connector (A).
- Check for continuity between the switch terminal (B) and body ground.
- With the parking brake pedal pressed, there should be continuity.
- With the parking brake pedal released, there should be no continuity.
NOTE: If the parking brake switch and the brake fluid level switch are OK, but the brake system indicator does not function, do the gauge control module self-diagnostic function.
- Connect the connector.
Was this page helpful?