Heated Steering Wheel Temperature Sensor Test
In this manual: Heated Steering Wheel Temperature Sensor Test
4steps
~24min
2/5difficulty
Done 0 of 4
Test
NOTE: SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
1. Driver's Airbag - Remove
2. Steering Wheel Temperature Sensor - Test


- Disconnect the connector (A).
- Measure the resistance between the terminals according to the table.
- Compare the resistance readings with the specifications shown in the graph; the resistance should be within the specifications.
- If the resistance is not as specified, the steering wheel temperature sensor (B) is faulty; replace the steering wheel assembly.

3. All Remove Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?